Common Applications
- Chippers
- Cyclones
- Hoppers
- Pipe Elbows
- Pneumatic Conveyors
- Pulverizers
- Screw Conveyors
- Slurry Pumps
- Turboseparators
- Wear Plates
ARC MX5 Rapid Curing Fine Particle Wear Compound
An advanced ceramic reinforced composite for the emergency repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack.
ARC MX5 can be used either to rebuild eroded metal surfaces or to provide a wear resistant, sacrificial surface which frequently outperforms the original metal, rubber liners, ceramic tiles or weld overlay.
ARC MX5 is chosen over other ARC Composites for abrasion when a rapid cure, emergency repair is needed. It is applied at a thickness of 1/8 inch or more.
Additional Information
Ask a Question
** Territory restrictions apply for most products.
Technical Data
Dry Temp. Range:
-20°F to 250°F
Wet Temp. Range:
-20°F to 140°F
Compressive Strength:
9200 psi
Flexural Strength:
6500 psi
Tensile Strength:
2400 psi
Tensile Adhesion:
Greater than 1750 psi
Shore D Hardness:
89
See product datasheet for additional details