ARC BX1 Contractor Grade Sliding Wear Compound
Manufactured by: Chesterton
Model: ARC BX1
Sales Territory: Indiana
An advanced contractor grade ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. ARC BX1 is formulated with a high concentration of ceramic beads and fine ceramic particles for extremely abrasive environments where metal loss is often repaired by more conventional and costly weld overlay. It is normally applied at a thickness of 6 mm (1/4 inch) or more.
Additional Information
Ask a Question
* Required Field
** Territory restrictions apply for most products.
** Territory restrictions apply for most products.
Brochures & Datasheets
Brochures
Installation & Operation Manuals & Technical Literature
Case Studies & White Papers
- Chesterton ARC BX1 / 855 Coal Handling Feed Screw Case Study
- Chesterton ARC 855 / BX1 Hydropulper Quaternary Screen Case Study
- Chesterton ARC BX1 Coating Hydrocyclone Sump Wear Plate Case Study
- Chesterton ARC BX1 / BX2 Cement Separator Case Study
- Chesterton ARC BX1 / S2 Inverted Discharge Chute Case Study
- Chesterton ARC BX1 Sinter Plant Cyclone Case Study
Technical Data
Wet Temp. Range:
-20°F to 205°F
Compressive Strength:
8400 psi
Flexural Strength:
4800 psi
Tensile Strength:
3100 psi
Tensile Adhesion:
greater than 1750 psi
Shore D Hardness:
85
See product datasheet for additional details