
Common Applications
- Apex Cones
- Bins and Silos
- Chutes
- Cyclones
- Exhausters
- Pipe Elbows
- Pneumatic Transport Lines
- Slurry Pumps
- Transport Screws
- Wear Plates
ARC 890 Coarse Grade Sliding Wear Compound
An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack.
ARC 890 can be used either to rebuild eroded metal surfaces or to provide a wear resistant surface, which frequently outperforms the original metal, weld overlay, rubber liners or ceramic tiles. It is normally applied at a thickness of 6 mm (1/4 inch) or more.
Additional Information
Ask a Question
** Territory restrictions apply for most products.
Brochures & Datasheets
Brochures
Installation & Operation Manuals & Technical Literature
Technical Data
Dry Temp. Range:
-20°F to 400°F
Wet Temp. Range:
-20°F to 205°F
Compressive Strength:
8800 psi
Flexural Strength:
5200 psi
Tensile Strength:
3500 psi
Tensile Adhesion:
greater than 1750 psi
Shore D Hardness:
85
See product datasheet for additional details