Common Applications
- Bins and Silos
- Fans and Housings
- Heat Exchangers
- Hoppers
- Impellers and Blades
- Pump Casings
- Tanks and Vessels
- Transport Screws
- Valves
- Waterboxes
ARC 855 Abrasion Control Liquid
An advanced ceramic composite formulated to protect equipment surfaces from aggressive chemical attack, corrosion, and erosion.
This two-coat system, available as 855 or 855N, provides extended wear and predictable preventative maintenance. ARC 855 is may be used alone, or in conjunction with other ARC composites. 855N is a silica free formulation of 855 and meets MIL PRF 31271 for high durability deck coatings. The cured ceramic composites provides outstanding chemical and abrasion resistance with a high gloss finish. The product are low in viscosity and can be easily applied by brush or roller.
Additional Information
Ask a Question
** Territory restrictions apply for most products.
Brochures & Datasheets
Brochures
Installation & Operation Manuals & Technical Literature
Case Studies & White Papers
- Chesterton ARC 858 / MX2 / 855 Coating Mining Case Study
- Chesterton ARC 858 / 855 Power Industry Case Study
- Chesterton ARC BX1 / 855 Coal Handling Feed Screw Case Study
- Chesterton ARC MX1 / BX2 / 855 Recurculating Slurry Pump Case Study
- Chesterton ARC 855 Chemical Processing Heat Exchanger Case Study
- Chesterton ARC 855 Waste Water Treatment Tank Case Study
- Chesterton ARC 858 / 855 Mining Dewatering Pump Case Study
- Chesterton ARC 858 / 855 Bottom Ash Dewatering Bin Case Study
- Chesterton ARC 858 / 855 Francis Turbine Case Study
- Chesterton ARC 855 / 858 / S2 Waste Water Vortex Pump Case Study
- Chesterton ARC 855 / BX1 Hydropulper Quaternary Screen Case Study
- Chesterton ARC 858 / 855 Waste Water Influent Pump Case Study
- Chesterton ARC 858 / 855 Primary-Cooling Water Pump Energy Savings Case Study
- Pulp & Paper Coating Best Techniques
Technical Data
Dry Temp. Range:
-20°F to 250°F
Wet Temp. Range:
-20°F to 250°F
Compressive Strength:
12000 psi
Flexural Strength:
8000 psi
Tensile Strength:
3400 psi
Tensile Adhesion:
> 2000 psi
Water Vapor Permeability:
4.50e-04
Salt Fog Test:
> 10000 hours hours
Shore D Hardness:
85
See product datasheet for additional details